The driving force for creep during creep forming is the applied stress. As the creep progresses, the elastic strain decreases, so that the internal stress decreases accordingly, and the applied stress decreases accordingly. Some researchers pointed out that the thermal tensile creep process is a new forming process for thin-walled titanium alloy composites. The process uses heating methods such as electrical resistance heating to heat thin-walled metal sheets or profiles to thermoforming temperatures before stretching and bending. As the final shape is formed, the temperature remains constant and the material creeps in the tensile direction of the mold surface. This results in stress reduction and in-line stress relaxation within the formed workpiece. Residual stress is reduced, thereby reducing springback of parts and improving forming accuracy. The research status, process principle, key equipment, processing technology, advantages and disadvantages of the new process technology are introduced. Finally, the application prospects of hot drawing-creep composite forming technology are prospected.
To date, the differences and connections between these two phenomena have not been explicitly explored. High-temperature short-term creep and stress relaxation tests were conducted on Ti6Al4V alloy. The microstructure of the alloy was observed using a transmission electron microscope. The effects of temperature, stress and time on creep and stress relaxation behavior were studied respectively. The correlations and differences between the two phenomena were compared based on the creep strain-time and strain rate-time relationships. The results show that the creep behavior under low temperature and low stress is controlled by atomic diffusion, and the creep behavior under high temperature and high stress is controlled by dislocation slip and creep. The stress relaxation behavior is mainly controlled by dislocation climbing. The stress relaxation behavior predicted from the creep data agrees well with the experimental results.







